Description
Evencure Hy-Cure is a unique two coat acrylic emulsion curing system. It has been formulated to achieve maximum curing efficiency as well as achieving a natural finish, anti-carbonation coating. Due to its unique formulation, Evencure Hy-Cure can be used as a "primer" coating. This allows aftertrades to be applied, including cementitious repair materials, epoxies and anti-graffiti coatings, negating the need to remove curing compound before application.
Application
Apply by airless spray, pressure pot spray or traditional type spray gun. Evencure Hy-Cure can also be applied by roller. It is important to apply the correct rate per litre and NOT to apply material too thickly. Keep a wet edge to enable a continuous film. FIRST COAT: Apply North to South as soon as bleed water has disappeared at a rate of 5 m² per litre. SECOND COAT: Apply East to West. After trades require a light scuff prior to application, to create a "key" to ensure adhesion between coatings.
Application rate
5 m² per litre per coat (two coats required)
Special features
Due to its unique formulation, Evencure Hy-Cure can be used as a "primer" coating, allowing aftertrades to be applied directly including cementitious repair materials, epoxies, and anti-graffiti coatings, without the need to remove the curing compound.
Features
- Extremely high curing efficiency
- Natural finish when cured
- Ideal primer for most aftertrades
- Water-based system
- No waxes, resins, or solvents
This Technical Data Sheet summarises our best knowledge of the product, including how to use and apply the product based on the information available at the time. Evenrange Pty Ltd does not accept any liability either directly or indirectly for any loss suffered in connection with the use or application of the product whether in accordance with any advice, specification, recommendation, or information given.
Evenrange Pty Ltd | 12 Frankston Gardens Drive, Carrum Downs VIC 3201 | ABN 92 062 754 545 | Phone: 03 9782 3233