Description
Evencure XDS is a blend of resins and surfactants emulsified in water and is specially formulated to cure freshly laid concrete. The impervious film formed by Evencure XDS prevents excessive water evaporation, promotes efficient cement hydration, minimises shrinkage whilst increasing durability of the concrete surface. Evencure XDS conforms to AS3799 standards and can take most aftertrades, after the oxidization process has been achieved (usually 45–55 days, depending on UV exposure).
Application
Evencure XDS is best applied with an airless spray but can be applied by brush, roller, or broom. Apply Evencure XDS, undiluted, to the concrete as soon as the bleed water has disappeared, and the concrete has hardened sufficiently so as not to be marked by the application process.
Application rate
5 m² per litre (according to AS3799 standards)
Special features
Due to its unique formulation and blend of resins, Evencure XDS will begin to break down after 7 days and, if applied at the specified rates, will totally oxidise and leave the surface, subject to UV exposure, within 45–55 days of application. This reduces the need for surface cleaning in preparation for aftertrades.
Features
- Suitable for sealing interior and exterior freshly laid concrete surfaces
- Conforms to AS3799 standards
- Can be removed, if required, using Evenrange Stripcure
- Available with red fugitive dye
Availability
Available in 20lt, 200lt and 1000lt containers.
This Technical Data Sheet summarises our best knowledge of the product, including how to use and apply the product based on the information available at the time. Evenrange Pty Ltd does not accept any liability either directly or indirectly for any loss suffered in connection with the use or application of the product whether in accordance with any advice, specification, recommendation, or information given.
Evenrange Pty Ltd | 12 Frankston Gardens Drive, Carrum Downs VIC 3201 | ABN 92 062 754 545 | Phone: 03 9782 3233