ProductsCuring CompoundsEco-CureTechnical Data Sheet

Eco-Cure – Technical Data Sheet

Description

Eco-Cure™ is an environmental liquid membrane compound manufactured for use on concrete road and highway construction. It is the first of its kind: a unique curing compound that does not contain hydrocarbons like resins and mineral spirits. After 7 years of research and numerous testing procedures, Eco-Cure™ was shown to have significant advantages over existing curing systems. After 28 days Eco-Cure™ oxidises and turns to dust, which can then be swept, washed or vacuumed off to leave a surface suitable for aftertrades. This dust does not have any adverse health or environmental issues.

Application

Apply Eco-Cure™ to the concrete as soon as the bleed water has gone and the concrete has hardened sufficiently so as not to be marked by the application process. Apply Eco-Cure™ undiluted. Best applied by spray, however, may also be applied by brush, roller or broom. If settling of product occurs, mix gently prior to use.

Application rate

5 m² per litre

Features

  • Environmentally friendly, contains no harmful chemicals
  • Complies with TXDOT-DMS-10 requirement
  • Increased abrasion resistance
  • Eliminates the need for curing by ponded water, damp hessian or polythene sheeting
  • Reduces concrete dusting and plastic shrinkage
  • No solvents, hydrocarbons or resins of any type
  • No wax or wax-based additives
  • No odour before or after application
  • No staining of clothing or equipment
  • No adhesion problems with aftertrades
  • No discoloration of the concrete surface
  • Equipment washable in water

Typical properties

Appearance: milky liquid. Coverage: 5 m² per litre. Solids: 6%. Flash point: >95°C. Dry time (tack free): 20 mins. Hard dry: 1 hour. Application temperature: 10°C – 35°C.

Availability

Available in 20lt, 205lt and 1000lt containers.

This Technical Data Sheet summarises our best knowledge of the product, including how to use and apply the product based on the information available at the time. Evenrange Pty Ltd does not accept any liability either directly or indirectly for any loss suffered in connection with the use or application of the product whether in accordance with any advice, specification, recommendation, or information given.

Evenrange Pty Ltd | 12 Frankston Gardens Drive, Carrum Downs VIC 3201 | ABN 92 062 754 545 | Phone: 03 9782 3233