Description
Evencure AC is a water-based pure acrylic modified emulsion used as a curing membrane on freshly poured concrete. Evencure AC contains no additional waxes or resins, therefore allowing for additional aftertrades if required. It can be used on all freshly laid concrete whether smooth or textured, indoors or outdoors, and exhibits excellent durability as a concrete sealer. Evencure AC conforms to AS 3799 standards (certification available upon request).
Application
Evencure AC is best applied with an airless spray but can be applied by brush, roller, or broom. It is imperative that application rate is achieved by whatever means.
Application rate
5 m² per litre (according to AS3799 standards)
Features
- Suitable for curing and sealing interior and exterior concrete surfaces
- Totally water-based
- Low odour, low toxicity, and non-flammable
- Will not yellow in sunlight
- Equipment washable in water
Typical uses
- General concrete curing
- Precast concrete
- Concrete driveways
- Garage and factory floors
Availability
Available in 20lt, 200lt and 1000lt containers.
This Technical Data Sheet summarises our best knowledge of the product, including how to use and apply the product based on the information available at the time. Evenrange Pty Ltd does not accept any liability either directly or indirectly for any loss suffered in connection with the use or application of the product whether in accordance with any advice, specification, recommendation, or information given.
Evenrange Pty Ltd | 12 Frankston Gardens Drive, Carrum Downs VIC 3201 | ABN 92 062 754 545 | Phone: 03 9782 3233