AC – Acrylic Modified Emulsion – Technical Data Sheet

Description

Evencure AC is a water-based pure acrylic modified emulsion used as a curing membrane on freshly poured concrete. Evencure AC contains no additional waxes or resins, therefore allowing for additional aftertrades if required. It can be used on all freshly laid concrete whether smooth or textured, indoors or outdoors, and exhibits excellent durability as a concrete sealer. Evencure AC conforms to AS 3799 standards (certification available upon request).

Download PDF

Application

Evencure AC is best applied with an airless spray but can be applied by brush, roller, or broom. It is imperative that application rate is achieved by whatever means.

Application rate

5 m² per litre (according to AS3799 standards)

Features

Suitable for curing and sealing interior and exterior concrete surfaces
Totally water-based
Low odour, low toxicity, and non-flammable
Will not yellow in sunlight
Equipment washable in water

Typical uses

General concrete curing
Precast concrete
Concrete driveways
Garage and factory floors

Availability

Available in 20lt, 200lt and 1000lt containers.

This Technical Data Sheet summarises our best knowledge of the product, including how to use and apply the product based on the information available at the time. Evenrange Pty Ltd does not accept any liability either directly or indirectly for any loss suffered in connection with the use or application of the product whether in accordance with any advice, specification, recommendation, or information given.

Evenrange formulates and manufactures concrete curing compounds sold direct to contractors and supplied to leading Australian construction distributors. To discuss a product recommendation or buy direct, contact Kane Latham.