ProductsConcrete TreatmentX-Pose – Concrete Surface RetarderTechnical Data Sheet

X-Pose – Concrete Surface Retarder – Technical Data Sheet

Description

Evenrange X-Pose Concrete Surface Retarder is a uniquely formulated liquid that retards the surface of the concrete, whilst allowing the subsurface to still harden. This unique feature allows easy removal of the treated concrete while the subsurface concrete remains hard and limits the failure of the aggregate bond in the exposed concrete.

Application

Evenrange X-Pose is a ready to use product. Using the appropriate spray equipment, apply one consistent coat at 3–5 m² per litre (depending on concrete porosity) to the concrete surface as soon as the initial bleed water has dissipated, but before the initial "set" has occurred. If possible, protect the concrete from direct sunlight and wind as this may "dry out" the concrete surface too quickly. After approximately 3–4 hours the treated concrete surface can be removed by brushing or pressure washing with adequate pressure. The exposed surface is trafficable to foot traffic and light machinery immediately after cleaning.

Application rate

3–5 m² per litre (depending on concrete porosity)

Features

  • Ready to use with no dilution
  • Totally water-based
  • Controlled depth of penetration
  • Treated surface can be removed with stiff brush or high-pressure wash
  • VOC compliant
  • Surfaces treated with X-Pose provide an excellent surface for bonding subsequent concrete overlays without the need for mechanical abrasion
  • Clean up with water

Caution notes

  • High temperatures will reduce the retardation properties
  • High cement content concrete may be more effective at the higher application rate

Availability

Available in 20lt containers.

This Technical Data Sheet summarises our best knowledge of the product, including how to use and apply the product based on the information available at the time. Evenrange Pty Ltd does not accept any liability either directly or indirectly for any loss suffered in connection with the use or application of the product whether in accordance with any advice, specification, recommendation, or information given.

Evenrange Pty Ltd | 12 Frankston Gardens Drive, Carrum Downs VIC 3201 | ABN 92 062 754 545 | Phone: 03 9782 3233